Universal-remote-control-urs WR7 Manual de usuario descargar pdf (Pagina 16)

Page 16

Programming WR7 using

the Learning Method

STEP 1: Line up the WR7 to the remote control

you want to “learn” from, head--to--head as shown

below. Start with both remotes’ IR windows touch-

ing (or nearly touching).

STEP 2: On the WR7, press the Component

button that you want to program (in this case

the button that says TV) and the ENTER [ENT]

button at the same time. Hold down both but-

tons for two seconds until the TV Component

button light turns on. This signals that you are

in programming mode.

IMPORTANT: You have 30 seconds to per-

form the next step while you are in program-

ming mode. If you do not press a button with-

in 30 seconds, the component LED light will

turn off. The remote will exit the programming

mode and you will have to start over.

STEP 3: Press any button on the WR7 that

you want to teach a command to. For example,

if you want to teach the [MUTE] button on the

WR7 the TV Mute command from the other

remote, first press the [MUTE] button on the

WR7 and the TV component button LED light

will blink once indicating that the WR7 is ready

to learn the command.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Sin comentarios

Universal-remote-control-urs WR7 Manual de usuario Pagina 16